ASTRO Direct Digital X-QAM twin 3, Руководство по эксплуатации

Страница: 5 / 16

3 Programming with the HE programming
software
3.1 Pre – configuration of the HE programming software
The X-QAM twin x – cards can be programmed via HE pro-
gramming software after plugging them into the base unit.
The activating of PID filter, NIT processing or the editing of
the Operator – ID can only be done with the programming
software! If it is not possible to choose the X-QAM twin x –
card from the list in the „Overview of the base unit“, you
should check the settings at “Options” and “Favoured plug-in
cards”. The card must be activated as below, to appear on
the list in the „Overview of the base unit“.
After reading out the base unit, the X-QAM twin x – card
appears on the used slot of the base unit.
Please note: Requested software version
X-5 Basis twin: 4.01
X-8 Basis twin: x.22
V16: x.22
Programming software: 5.00
2 Pre – configuration 3 Programming with HE programming software
5
☞
2 Pre – configuration /
Cabling of the X-QAM twin x
The X-QAM twin x – cards can be operated with bridged
input signals. This means the SAT – IF is taken from the
loop-through output of tuner A to the input of tuner B.
SAT – IF bridged from tuner A to tuner B
Tuner A and Tuner B connected to SAT – IF separately
SAT – IF input
Tuner B Tuner A
SAT – IF output