ASTRO ATS-8900, Руководство оператора

Страница: 20 / 48

OPERATING THE TABBER
16
INFO SCREEN INFORMATION
Item Description
Job # The number of the Job that is currently selected.
#Tabs The number of Tabs being applied.
Tab Pitch
The distance between the lead edge of the tab and the next tab
including the space between tabs, plus 0.01".
Paper-L The length of the piece in inches.
Offset
Distance from the leading edge of mail piece to leading edge of
tab/stamp.
TabV
The voltage on the Sensors when a tab is present under the
Sensors. Clear and Opaque Tabs will have different voltage
readings.
Trip
This voltage is used to determine the difference between the Tab
and the Backing to cause the tab to feed.
Tab Type
There are two tab types: Clear and Opaque .
(
See Appendix B for samples.
)
4. Pressing the RUN key changes the screen
to the running mode so that the Rate in
Pieces per Hour and the number of Pieces
Run are displayed.
5. To stop the Tabber, press the
Red
Stop key next to the RUN key on the Control Panel.