ASTRO ATS-8900, Руководство оператора

Страница: 28 / 48

OPERATING THE TABBER
24
Separate
–
Allows individual adjustment
of each tab/stamp position via the Offset
Value.
Together
–
Tabs/Stamps are placed next to
each other, starting at the Offset Value (
see
below
) set for Tab 1.
BACK
–
Returns you to the previous screen.
Pressing the Position soft key prompts you to set
the Offset Value for each Tab/Stamp, starting
with Tab 1.
Offset Value
= Distance from leading edge of
mail piece to leading edge of Tab/Stamp.
Tab 1
–
Use this soft key to set the Offset
Value for Tab/Stamp 1.
Tab 2
–
Use this soft key to set the Offset
Value for Tab/Stamp 2.
Tab 3
–
Use this soft key to set the Offset
Value for Tab/Stamp 3.
BACK
–
Returns you to the previous
screen.
If any of the
Tab n
(
Tab 1, Tab 2, Tab 3
) soft
keys are selected, you will be asked to enter the
Offset Value for the Tab Number you selected.
NOTE: The number of
Tab n
choices you are
presented with is based on the
“
# Tabs
”
and the
“
tab placement
”
(
Separate, Together
), that you
previously selected.
If # Tabs was set to 1 or tab placement
“
Together
”
was selected; you will be prompted to
“
Enter Offset for Tab 1
”
, as soon you press the
Position key.
Enter the desired Offset Value for Tab, using the numeric keypad. Then press the SAVE key.
Press BACK . Repeat this process for each tab position.
IMPORTANT
THE TAB/STAMP POSITION IS BASED ON THE PLACEMENT OF THE
BEGINNING OF THE TAB/STAMP WITH RESPECT TO THE LEAD EDGE
OF THE PIECE. WHEN PLACING TABS/STAMPS, THE LENGTH OF THE
TAB IS NOT CALCULATED.