ASTRO astrojet 5000, Руководство по обслуживанию

Страница: 39 / 55

SECTION 5
DISASSEMBLY
– ASSEMBLY
33
Removing the Print Engine
1. See instructions above and remove Side Covers and Top Cover.
2. Then, remove Main PC Board and Cleaning Station.
3. Remove four screws holding Cover over the Print Engine.
4. Remove Guide Plate by pressing down on the Plate to free it from the Guide Plate Shaft. Then slide it
toward feed end of Printer and remove it.
5. Lift spring from Guide Plate Shaft on right-
hand side of Printer.
6. On left-hand side of Shaft is a second spring.
Lift it and remove Shaft from Printer.
7. Release wiring harness from clamp [2] , unplug
two top wires on Clear Machine Switch [1] and
unplug connector on Motor [3] .