ASTRO AstroJet 1000, Инструкция по установке и эксплуатации, Страница: 12 / 57

8
3. Install the CD in the computer. The CD should start automatically. If it does not click on the
Start button, then select Run . Type “ D:\Setup.exe ” (where D is the CD drive) and then click
OK .
4. The AstroJet Setup Menu will appear on your screen. It contains five options:
Install Printer Software
Read the Manuals
Browse this CD
Install Adobe Acrobat – This is version 4.0 of Adobe Acrobat for reading and printing the
Operator Manuals.
www.astromachine.com – this is a link to our web site if you are connected to the Internet.
5. Click on “Install Printer Software” and then choose the operating system that is installed on
your computer. If you are using Windows 95 refer to the instructions under “Windows 95” and
if you are using Windows 98, Windows NT4, or Windows 2000 refer to the instructions under
“W98 / NT4 / W2000”.
6. If this is a new printer installation (not a software update) go to the installation instructions for
your operating system to complete the installation. If this is a software and firmware update,
you must also download a new “
BIOS ” to the printer.
Windows 95
1. Insert the program CD into your CD-ROM drive. Click on “Install Printer Software”.
2. Select “Windows 95”.
3. Select “ODBC95” and follow the instructions in the windows to install “DCOM95 for Windows
95”. When this is installed Restart your computer.
4. Open the program CD again and select “Install Printer Software”, then “Windows 95”.
5. Select “AstroJet” and follow the directions in the windows. At the end of the installation you
will be asked to identify the model of your printer. Select the AstroJet 1000 and then restart
your computer.
Windows 98, NT4, or 2000
1. Insert the program CD into your CD-ROM drive. Click on “Install Printer Software”.
2. Select “W98 / NT4 / W2000” “AstroJet Setup will appear with the “Welcome: window. Follow
the instructions.
3. At the end of the installation you will be asked to identify the model of your printer. Select the
AstroJet 1000 and then restart your computer.
BIOS Installation
1. Load the AstroJet software for your printer into your computer.
2. Connect the computer to the printer and turn the printer ON .
3. Select the “AstroJet Control Panel” icon on your desktop and double click on it.
4. Select “Properties”, then select “Update BIOS”.
5. Click on the Update BIOS button. When the software completes the update check the printer’s
control panel for the new BIOS level.
NOTE: DO NOT TURN THE POWER OFF DURING THIS PROCESS.