Configuration via the web interface
Operating Manual HDIQ 4 -
Version 02-2022A
Page 16
Video Format: MPEG-2 or H.264
Aspect Ratio: Aspect ratio (Auto, 4:3 or 16:9)
Low Delay: Latency (Normal, Mode 1, Mode 2, Manual), when set to “Normal”, Low Delay mode
is disabled.
Video Bit rate: Adjustable from 1 to 19 Mbps
DTS Delay: Adjustable from 1 to 500; default is 200
GOP Frame: Adjustable to 1, 2 or 3
H.264 Profile: Adjustable to Automatic, Baseline, Main or High
H.264 Level: Adjustable to 2.2, 3, 3.1, 3.2, 4, 4.1, 4.2, 5, 5.1
Auto Config: automatic setting of resolution on input signal, if checkbox is activated
Resolution: Resolution (1920x1080x60i, 1440x1080x60i, 1440x1080x50i, 1280x720x60p,
1280x720x50p, 720x480x60i, 720x576x50i)
Audio Format: MPEG2, MPEG2 AAC, MPEG4 AAC or AC3
Digital Normalization: Adjust/boost dialogue voices between -31 and - 1 dB
Set higher values to make dialogue clearer/louder.
Audio Bit rate: 64, 96, 128, 192, 256 or 320 Kbps
Audio Gain: 0 to 400%; default is 100%
Program Out Enable: Enable and assign output; A, B, C, D for SPTS, E for MPTS
Service Provider: Provider name
Program Name: Program name
Service ID (SID): hexadecimal, 0x001 to 0x999 (1 to 2457)
PMT ID: hexadecimal, 0x001 to 0x999 (1 to 2457)
Video PID: hexadecimal, 0x001 to 0x999 (1 to 2457)
Audio PID: hexadecimal, 0x001 to 0x999 (1 to 2457)
Service PID hexadecimal, 0x001 to 0x999 (1 to 2457)
Video (LED): green: input signal OK, red: no input signal
Video Format: Resolution of the input signal
Encoding (LED): green: device is processing the input signal, red: error
Bitrate: current bit rate of the input signal
HINWEIS
:
The different combinations of video format, video bit rate, low delay mode and
resolution of the signal source lead to different latencies on the receiving side.
ASI Input
This function is not available. Please leave the default settings.
DRAFT VERSION
Содержание 4026187240868
Страница 1: ...Version 02 2022A DRAFT VERSION ...
