Astria MONTECITO MONTE, Инструкция по установке и эксплуатации

Страница: 3 / 26

TABLE OF CONTENTS
Safety Rules and Specifications for
Mobile or Manufactured
Home Installation .........................Page 2
Introduction ......................................Page 3
Parts Required .................................Page 3
Optional Equipment ...........................Page 3
Operating The Montecito Fireplace ....Page 3
Fuel ...................................................Page 3
Starting And Maintaining A Fire ........Page 4
Combustion Control .........................Page 4
Refueling For Best Performance .......Page 4
Smoking – Causes And
Troubleshooting ..............................Page 4
Important Cautions ...........................Page 5
Maintaining Your Fireplace ................Page 5
Creosote ............................................Page 5
Chimney Maintenance .......................Page 5
Dealing With A Chimney Fire .............Page 5
Finish Door Casing Care ....................Page 5
Disposing of Ashes ...........................Page 6
Refractory Installation .......................Page 6
Door Installation ...............................Page 6
Door Adjustment ...............................Page 6
Facade Installation ............................Page 7
Hearth Extension Requirements ........Page 7
Cold Climate Installations ..................Page 7
Framing Dimensions .........................Page 8
Nailing Flanges ..................................Page 9
Facing And Mantel ............................Page 9
Fireplace Blower ................................Page 10
Hot Air Ducting Installation ..............Page 10
Gravity Kit .........................................Page 10
Outside Air Kit ..................................Page 11
Chimney System ...............................Page 12
Chimney Installation Notes ...............Page 12
Chimney Installation Instructions ......Page 13
Offset Chimney Installation ...............Page 14
Angled Wall Radiation Shield ............Page 16
Glass Care - Replacement .................Page 17
Glass Care - Cleaning ........................Page 17
Gasket Replacement ........................Page 17
Fireplace Installation ........................Page 17
Chimney Support Installation ............Page 18
Chimney Chase And
Multiple Terminations......................Page 18
Masonry Application Instructions .....Page 19
Installation Accessories ....................Page 20
Replacement Parts ............................Page 21
Specifications ....................................Page 21
Clearances to Combustibles ..............Page 21
Chimney Components Lists ..............Page 22
Warranty ...........................................Page 25
Product Reference Information .........Page 26
THE FIREPLACE
INTRODUCTION
The Montecito™ wood-burning fireplace is an
energy efficient, heat circulating, closed com-
bustion fireplace. You will receive a lifetime
of comfort and enjoyment from your fireplace
provided it is installed, maintained and oper-
ated properly.
•
Please read these instructions and retain
this manual for future reference.
•
Before beginning the fireplace installation,
consult the local authorities to obtain your
building permit and check your local building
codes. Install the fireplace only as described
in these instructions and using only IHP
components.
• This fireplace has been tested for CAN/ULC
S610-M87 and ANSI/UL 127 under report
number 307-4084. It has also been tested
for EPA 40 C.F.R Part 60, section 60.532(b).
Certificate number 537.
•
The Montecito fireplace is NOT intended
for use with a gas log set. Do not use a
fireplace insert or any other product with
this fireplace unless it is specified by IHP
for use with this appliance. Failure to follow
these instructions will void the certification
and the warranty of the fireplace and may
result in an unsafe installation.
• These appliances are designed to provide
supplemental heat to the immediate area
only. Therefore, it is advisable to have an
alternate heat source when installed in a
dwelling.
PARTS REqUIRED
Fireplace Model MONTE
• 6” diameter chimney
*
- Model ASHT+,
S-2100+, , or AC
manufactured by Security Chimneys Inter-
national™ only, including:
- Chimney lengths
- Elbows (where necessary)
- Associated components as per these
installation instructions
•
.. Decorative Door - Required
.... (Order Separately - See Page 20 )
•
Front Facade kit - Required
... (Order Separately - See Page 20 )
•
UZY5 blower (included in the fireplace).
•
VRUW Blower Speed Control (included)
•
Outside air kit (Included w/Fireplace)
OPTIONAL EqUIPMENT
• Additional Equipment (optional)
- Forced Air Kit u
- AC Chimney Adaptor
*
(required if using AC Chimney)
CONGRATULATIONS!
When you purchased your new fireplace, you joined the ranks of thousands of individuals
whose answer to their home heating needs reflects their concern for aesthetics, efficiency
and our environment. We extend our continued support to help you achieve the maximum
benefit and enjoyment available from your new fireplace.
Thank you for selecting a IHP fireplace as the answer to your home supplemental heat-
ing needs.
- AC Chimney Outside Air Kit
- Gravity Venting System
- Rigid Firescreen
u
Not tested under EPA certification. If in-
stalled, this appliance no longer qualifies
for EPA certification.
OPERATING THE FIREPLACE
Fuel
USE SOLID NATURAL WOOD FUEL ONLY. The
Montecito fireplace is designed to work best
when fueled with dry seasoned natural wood
only. Hardwoods are preferred to softwoods
since the energy content of wood is relative to
its density. Hardwoods will result in a longer
burning fire and less frequent refueling. A
moisture content of 15% to 20% (seasoned)
is recommended. Wood that has been cut and
split and let to dry under a cover for a period
of one year will usually meet that criteria. The
required drying time will vary depending on the
climate. Wood that is packed tight together will
take longer to dry. Seasoned wood is darker in
color than wet wood and will have visible cracks
in the grain on the ends. Excessively wet wood
will be difficult to burn and will result in lower
efficiency, increased creosoting and deposits on
the glass and in the chimney. Excessively dry
wood will burn well but will also have higher
emissions and shorter burning time.
Do not burn scrap or garbage, treated wood or
wood such as driftwood from the ocean which
has been exposed to salt or other chemicals.
Salt or chemicals can corrode the firebox and
chimney. Do not burn large amounts of paper,
cardboard, Christmas tree branches or building
construction materials. Intense firing with these
materials may overheat the fireplace, causing
damage to the unit, a fire or even possibly ignit-
ing a chimney fire if the chimney is creosoted.
Burning unapproved fuel, resulting in excessive
pollutants being emitted, may be prohibited and
subject to a fine or other penalty by the authority
having jurisdiction in your area.
Processed firelogs can be used. Although, do
not poke or stir the logs while they are burning.
Use only firelogs that have been evaluated for
the application of fireplace and refer to firelog
warnings and caution markings on packaging
prior to use.
First Fires
Before using the fireplace make sure to remove
the plastic wrapping and EPA label on plated
door. Remove any glue residue left by the
label using mild soap.
The first five or six fires should be small fires of
short duration (about 30 to 60 minutes). This
will help cure the refractory bricks. During the
first few fires of this appliance there may be
some odor and smoke due to the curing of the
paint, dust accumulation and burning off of
lubricants used in the manufacturing process.
It may set off a smoke alarm located in the same
room. For this reason the room should be well
ventilated for the first few fires.
*
Available from Security Chimneys™
3