NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
35
Outdoor Kit Installation
900355-00, 06/2016
Innovative Hearth Products
Montebello
®
ST Direct-Vent Gas Fireplaces
Figure 51- Installing Bottom Channel and Window Support
Bottom Channel
(
item
#5)
3. See
Figure 51.
a) Hold the Bottom Channel (
item
#5) with the Tabs facing UP
and Lip facing OUT and DOWN, and then slide it UNDER the
Fireplace Bottom. Align the holes.
b) Hold the Window Support (
item
#4) with the Track facing OUT
and the Split facing DOWN.
Place the Split over the outside edge of the Fireplace Bottom,
and then push the Window Support DOWN until completely
seated on the Fireplace Bottom. Align the holes.
c) Install the three (3) provided #10-16 x 3/8" Screws (
item
#8)
through all three layers.
Note: Item numbers correspond to
Figure 48.
Three (3)
#10-16 x 3/8" Screws
(
item
#8)
~
~
Bottom Channel (
item
#5)
(shown oriented as installed)
Window Support (
ITEM
#4)
(shown oriented as installed)
Figure 50
Track in
Window Support
Outside edge
Tab (one of two)
on Bottom Channel
Lip on
Bottom Channel
Note: Item numbers correspond to
Figure 48.
Tab on Bottom Channel
Track in
Window Support
Tab on
Bottom Channel
Window Support
(
ITEM
#4)
[DETAIL:
SIDE VIEW]
Fireplace Bottom
(cutaway)
Bottom Channel
(
ITEM
#5)
Silicone
Silicone
Split in
Window Support
Window Support
(
item
#4)