background image

    Fir

Table

 

U

ser 

G

uide

DANGER

WARNING

WARNING

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from
the appliance and immediately call 
your gas supplier or fire department.

Do not store or use gasoline or other 
flammable vapors and liquids in the 
vicinity of this or any other appliance. 
An LP-cylinder not connected for use 
shall not be stored in the vicinity of 
this or any other appliance.

WARNING

Improper installation, adjustment, 
alteration, service or maintenance can 
cause injury or property damage. Read 
the owner’s manual thoroughly before 
installing or servicing this equipment. If 
the information in this manual is not 
followed exactly, a fire or explosion 
may result causing property damage, 
personal injury or loss of life.

Save  these  instructions  for  future  use.  If  you  are 
assembling this unit for someone else, give this manual 
to him or her and read and save for the future.

For outdoor use only.

HYFP50095

Complies with ANS Z21.97-2014   CSA 2.41-2014,

 Outdoor Decorative Gas Appliance Standards.

Item Number:
Model No.:S5-005

Normal Hourly Input: 50,000 BTU/hr (14.65 kw)

Manifold Pressure: 11 inch w.c. (2.74 kpa)

.

A302004100

Summary of Contents for A302004100











Reviews: