Astria.us.com
126810-01B
26
AUT
O
OFF
ON
Thermopile
SPECIFICATIONS
Model Sheridan18NM
• Input Rating: 24,000/36,000 Btu/Hr
• Fuel: Natural Gas
• Ignition:
Electronic
• Manifold Pressure: 3.5" W.C.
• Inlet Gas Pressure (in. of water):
Max. - 10.5" W.C, Min. - 5.0 W.C *
• Shipping Weight: 32 lbs.
Model Sheridan18PM
• Input Rating: 24,000/36,000 Btu/Hr
• Fuel: Propane/LP Gas
• Ignition:
Electronic
• Manifold Pressure: 10" W.C.
• Inlet Gas Pressure (in. of water):
Max.- 14" W.C, Min. - 11" W.C *
• Shipping Weight: 32 lbs.
Model Sheridan24NM
• Input Rating: 25,000/39,000 Btu/Hr
• Fuel: Natural Gas
• Ignition:
Electronic
• Manifold Pressure: 3.5" W.C.
• Inlet Gas Pressure (in. of water):
Max. - 10.5" W.C, Min. - 5.0 W.C *
• Shipping Weight: 34 lbs.
Model Sheridan24PM
• Input Rating: 25,000/39,000 Btu/Hr
• Fuel: Propane/LP Gas
• Ignition:
Electronic
• Manifold Pressure: 10" W.C.
• Inlet Gas Pressure (in. of water):
Max.- 14" W.C, Min. - 11" W.C *
• Shipping Weight: 34 lbs.
* For purpose of input adjustment
WIRING DIAGRAM
SERVICE HINTS
When Gas Pressure Is Too Low
• pilot will not stay lit
• burners will have delayed ignition
• appliance will not produce specifi ed heat
• propane/LP gas supply may be low
You may feel your gas pressure is too low. If
so, contact your local propane/LP or natural
gas supplier.
TECHNICAL SERVICE
You may have further questions about instal-
lation, operation, or troubleshooting. Please
contact your IHP dealer for any questions or
concerns. When contacting your dealer please
have your model and serial numbers of your
appliance ready. You can also visit our web site
at Astria.us.com.
REPLACEMENT PARTS
See
Pages 27-28
for a complete replacement parts
list. Use only parts supplied from the manufacturer.
Normally, all parts should be ordered through your
IHP distributor or dealer. Parts will be shipped at
prevailing prices at time of order.
NEVER USE SUBSTITUTE MATERIALS. USE OF
NON-APPROVED PARTS CAN RESULT IN POOR
PERFORMANCE AND SAFETY HAZARDS.
When ordering repair parts, always give the follow-
ing information:
1. The model number of the appliance.
2. The serial number of the appliance.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the appliance.
If you encounter any problems or have any ques-
tions concerning the installation or application of
this appliance, please contact your dealer.
CAUTION: Label all wires
prior to disconnection when
servicing controls. Wiring
errors can cause improper
and dangerous operation.
Verify proper operation after
servicing.
f i r e - p a r t s . c o m
