Operation
900683-00, 05/2017
Innovative Hearth Products
Scorpio™ Series Direct-Vent Gas Fireplaces
59
Installing the Scorpio™ 40/45 Series Charred Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 32 - Charred Oak Log Set
Log Number
Description
1
Left Rear Log
2
Rear Log
3
Front Right Log
4
Top Front Right Log
5
Top Front Left Log
Catalog number for the entire set: See
Page 67
for ordering
information
3
2
5
4
1
1
2
3. Align the notches in the left rear log (1) with the left rear locating tab
(Figures 56 and 57)
.
4. Position the Rear Log (2) on the left front and right rear placement locating tabs
(Figures 56 and 58)
.
Figure 56B - Locate log placement tabs, 45”
1. If necessary, remove the glass door
(Pages 61-62)
. Locate the placement tabs
(Figure 56A or 56B)
.
2. Bend up the log placement tabs
(Figure 56A or 56B)
. Place glowing embers
(Figure 56A).
Figure 56 - Locate log placement tabs, 40”
Figure 57 - Place log #1
Figure 58 - Place log #2
Figure 56A
Tab for
Log #1
Tab for
Log #2
Tab for
Log #2
40” Models
45” Models
Tab for
Log #1
Tab for
Log #2
Tab for
Log #2
Tab for
Log #3
Do not place
embers over
the big slots
Place Glowing Embers
