Operation
900683-00, 05/2017
Innovative Hearth Products
Scorpio™ Series Direct-Vent Gas Fireplaces
57
Installing the Scorpio™ 35 Series Charred Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Log Number
Description
1
Left Rear Log
2
Rear Log
3
Top Front Right Log
4
Top Front Left Log
1. If necessary, remove the glass door
(Pages 61-62)
. Locate the placement tabs
(Figure 51)
.
2. Bend up the log placement tabs
(Figure 51)
. Place glowing embers
(see Figure 51)
.
3. Align the notches in the left rear log (1) with the left rear locating tab
(Figures 51 and 52)
.
Catalog number for the entire set: See
Page 67
for ordering
information
3
4
2
1
Figure 51 - Locate the log placement tabs
Figure 53 - Place log #2
Figure 52 - Place log #1
Figure 54 - Place log #3
4. Position the Rear Log (2) on the left front and right rear placement locating tabs
(Figures 51 and 53)
.
5. Position the top front right log (3), as shown in
Figure 54
on the locating pin outlined in
Figure 53
.
Place Glowing Embers
Tab for
Log #2
Log Location Tabs
Tab for
Log #2
1
2
Pin for
Log #3
3
Landing area for Log #4
Table 31 - Charred Oak Log Set
Do not place
embers over
the big slots
Tab for
Log #1
