Astria.US.com
126875-01_G
13
INSTALLATION
Continued
FINISHING FIREPLACE FOR INSTALLATION
ParisLights43 series fireplace come with the rear panel semi-installed.
If you will be using the fireplace for a one sided regular application,
you will need to finish the installation of the rear panel. If you will be
upgrading the fireplace to a see-thru, the rear panel will need to be
removed (See Upgrading ParisLights43 to See-Thru Application).
1. Using self-tapping screws provided and holes on rear panel as
a guide, screw the rear panel to the fireplace as shown in Figure
16.
INSTALLING HOOD
1. Loosen screws at top of face opening and slide hood through
screws as shown in Figure 17.
2. Tighten screws securing hood to fireplace.
Figure 16 - Installing Rear Panel for Regular Applications
Figure 18 - Removing Rear Panel for See-Thru Applications
Figure 19 - Removing for See-Thru Applications
Figure 17 - Installing Hood
UPGRADING PARISLIGHTS43 TO SEE-THRU APPLICATION
Removing Rear Panel
1. In the rear of the fireplace, locate screws at top of rear panel and
remove as shown in Figure 18. Discard screws and rear panel.
2. Unscrew mount bracket from top face as shown in Figure 19.
Discard mounting bracket and replace screws.
