Astrel Instruments AST8300-B / AST16200-B
Wifi and Ethernet operations
When the
Wifi
antenna is mounted the camera acts as a WiFi access point, like a normal wifi
router, that you can connect to using a PC/tablet/smartphone. The wifi connection is open, no
password required, and by default the network name is
ast_ap
followed by the camera
s/n
while the ip address is
10.0.0.1
.
When the camera is connected using an
Ethernet
cable, the default ip address is
10.42.0.10
.
In order to connect to the Camera you also need to configure the PC LAN network accordingly,
assigning for example the
10.42.0.1
IP address.
Your PC/smartphone/tablet should connect automatically when the camera powers up.
The network configuration can be modified using the corresponding application.
WARNING: remember to connect the WiFi antenna.
Once connected, you can operate the camera in Connected mode like described in the
following paragraph.
Getting Started 7/21 rev A