Astrel Instruments AST8300-B / AST16200-B
Using the touch LCD monitor
The touch LCD monitor is used in the Stand Alone mode to operate the camera. It is mounted
on the back cover by means of an articulated mount which allows a proper orientation in every
telescope position. The monitor can be rotated around the connecting screw and around the
connecting tube.
Mount the monitor as indicated in the pictures below: start by mounting the connecting tube to
the back of the camera.
Then insert the monitor mount in the other end of the tube:
You can lock the monitor in the right position using the 2 white plastic knobs. Always be sure to
lock the monitor properly to avoid movement during the exposures.
Getting Started 11/21 rev A
