15
VIRON™ QT 1000 robotic cleaner
owner’s Manual
14
VIRON™ QT 1000 robotic cleaner
owner’s Manual
Figure 17. Unplug
5.
Remove the cleaner from the pool and untangle all
kinks and coils in the power cable. Start at the cleaner
head. Lay the cable in the sun to loosen any tangling
memory.
Figure 18. Untangle the Power Cable
7.2
Clean the Filter Canister
The filter canister should be cleaned at the end of each
cycle.
1.
Remove the cleaner from the water using the Elevate
System and let the remaining water drain.
2.
Set the unit on four wheels.
3.
Push the cover lock (1) and lift the cover (2) until it is
secured in the vertical position.
2
1
Figure 19. Lift the Cleaner Cover
4.
Remove the filter canister assembly from the body (3).
3
Figure 20. Remove the Filter Canister
5.
Push the quick release button on the canister
assembly (4) and pull open (5).
6.
Separate the filter canister from the filter support (6).
5
4
Figure 21. Open Filter Canister Assembly
