24
Warning: for the first 30 minutes after your device has been activated with the magnet for
the first time, the siren sounds only for a short time, at a low volume. You are in TESTS
mode. For more information on this mode, refer to item 4.5.
You have successfully completed all your validation tests. You can now carry out the last operations
below:
10
Replace the cover.
11
Tighten the 4 screws again.
12
Your device is in “off mode” , you must activate
it and check that it is operating properly by
carrying out the validation tests again (look
up item 3.7).
13
Warning: it is essential that the
4 caps are put in place.
x4
x4
