Getting Started
41-001387-00 Rev 00 – 01.2011
3
Getting Started
The 6731i must be set up and configured prior to its first use. This section describes phone behavior and start up screens
you may see when the phone is first plugged in, or when it is restarted.
Plugging in and Starting the Phone
The 6731i automatically begins the start up sequence as soon as it is connected. The phone goes through this process the
first time you plug in your phone and every time you restart your phone.
The phone displays the following startup screens:
During the first start up, the 6731i phone attempts to contact the
Redirection and Configuration Server
(rcs.aastra.com)
for current server information. No personal information is transmitted from the phone during this process.
The 6731i phone may also look for configuration servers on your local network (press
3
Remote
to enter a remote server
address, or
4
Skip
to continue without checking for servers).
Note:
Some start up screens only appear the first time you connect your phone, or if your phone has been factory defaulted.
Aastra 6731i
Firmware Loaded
LLDP
Initializing
network
Contacting
Redirector
Remote
Auto Discovery
Skip
