Astr
a Ope
ration Manu
al: E
spre
sso Mach
ine
s & Ste
ame
rs
p.
29
SELECTED DRINK EXTRACTION ADJUSTMENT
1
. To enter the programming mode, follow the instructions on pg. 26
2
. Select “Portion Programming”. The display will read “Push Drink Key”.
3
. Select the desired drink to be programmed. Press the button once more and the grinder
will automatically start grinding beans based on the grinder settings in the Programming
Submenu (see Table 3). The machine will then begin to extract the desired drink. Press
“Enter” when desired portion is achieved.
4
.
(Super Mega only)
For drinks that require more than espresso (ex. latte), the machine
will dispense milk and/or hot water. Select the desired amount of foamed milk or hot
water and press the “Enter” button when each ingredient has reached the desired portion.
5
. Pressing the “Enter” button a second time will cause the machine to record and save
the settings for all portions of the drink.
6
. Once the programming is complete, press the “On/Off Reset” button twice to exit the
programming mode.
EMPTYING & RESETTING THE WASTE BIN
1
. The machine is programmed to let you know that the waste bin is full after 40 drinks.
2
. If you get this warning, pull out the waste bin and empty it. This is a good opportunity to
check other supplies like milk.
3
. To reset the message, press reset on the touchpad or you can either toggle the red On/
Off switch for several seconds or open the front door for several seconds and close it.
To permanently disable the waste bin message, navigate to “Information” inside the
programming menu (see page 27). Once inside “Information” hold the “Clean” button for 5
seconds. Navigate down to “Waste Drawer Cap.” And decrease the value down to zero; this
will disable the message.