Table 2 | Programming Submenu
LCD Display
Parameter Determination
Portion Programming
Choose portion for each button (Table 3)
Steam Programming
Control Temperature for Steam Wand (A2000 Only)
Factory Portion Settings
Factory default portions one regular button
Decaf Factory Settings
Factory default portions one decaf button
Factory Portion Settings All
Factory default all portion settings
Each drink selection has up to seven parameters that can be altered by the user to match the
user’s drink preferences. The seven parameters are set forth in Table 3. The drink parameters
can be changed by pressing the “Left/Right” buttons to navigate through the seven parameters.
At each submenu, the user can change the preset parameter by pressing “Enter” for Yes or No,
respectively. Use “Left/Right” to toggle the setting. To record a change, press the “Program”
button on the touch pad. To exit, press the “On/Off Reset” button.
Table 3 | Portion Programming Submenu
LCD Display
Parameter Determination
Espresso
Dispense espresso (Y/N)
Milk
Dispense milk (Y/N) (Super Mega Only)
Americano
Add hot water to espresso (Y/N)
Double
Produce 2 shots consecutively (Y/N)
Espresso First
Dispense espresso before milk & water (Y/N)
Reg. Grinder
Grinding time for caffeinated grinder (# Seconds)
Decaf. Grinder
Grinding time for decaffeinated grinder (# Seconds)
(For extraction & portion instructions, refer to pg 29 )
Table 4 | Set Point Submenu
LCD Display
Parameter Determination
Steam Boiler Set Point
Choose PSI in Boiler
Group Set Point
Choose temperature at Brew Chamber
Table 5 | Management Submenu
LCD Display
Parameter Determination
Management
See total count of drinks served