Astr
a Ope
ration Manu
al: E
spre
sso Mach
ine
s & Ste
ame
rs
p.
11
1
. Setting the Desired Temperature
(The goal temperature for the beverage)
• Press the “Set” button on the display.
• Display will read “Set.”
• Press “Set” button again.
• Display will read “165°F”.
• If you would like to change this pre-set temperature, press the up arrow to raise the
temperature. Press the down arrow to lower the temperature.
• Once you have selected the desired temperature, press the “Set” button.
• The display will show the sensor’s current temperature.
• Face the steam wand toward the drain tray.
• Move the switch located underneath the display to the “Manual” position.
• Let the steam blow out for a few seconds.
• Move the switch to the “Automatic” position; this will turn the steam wand off.
• Place a desired amount of milk under the steam wand.
• Move the switch to the “Manual” position.
• Once the milk has reached the proper temperature, move the switch to the “Automatic”
position.
• Remove the steam wand from the milk and face it towards the drain tray.
• Press the “Manual” button for a few seconds, this will clear the steam wand. Use a damp
cloth to wipe down the steam wand.
• Move the switch to the “Automatic” position to turn the steam wand off.
U S I N G T H E M A N U A L S T E A M F U N CT I O N W I T H A N A U TO M AT I C WA N D
When boiler pressure on the gauge is between 15 and 20 PSI, the machine is ready to be put
into program mode. This procedure is used to program the desired temperature for automatic
steam wands.
Your machine comes pre-programmed with the factory-suggested setting. This is 165 degrees
Fahrenheit. Ensure that the machine is ON and LED displays the current temperature. Each
steam wand can be programmed and operated INDEPENDENTLY as follows:
P R O G R A M M I N G T H E A U TO M AT I C S T E A M WA N D
