Astor-Bannerman ABW6, Руководство пользователя и инструкция по установке

Страница: 6 / 12

Page: 6
Version 3 : 01-04-016
Important: The attachment rail is the main load bearing fixing; it is vital that it is
secured correctly.
Measure 100mm up from the floor along the centre-line of the final position of the unit; using a
spirit level, draw a horizontal line, either side of the centre line, at least 50mm long.
Centre of fixing holes
1200mm above Floor
Place the attachment rail with the open lip upwards, on the line . With a pencil mark two of the
holes for the rail at least 50mm apart.
Using a 6mm masonry bit, drill two full depth pilot holes at the marked positions and then open
up in order to accept the anchor fixings.
Fix the attachment rail, with the open lip uppermost onto the wall using two suitable fixings.
Ensure that the rail is level using a spirit level (adjust to suit) and check that it is secure.
With assistance, place the rise and fall unit onto the wall ensuring that the two short rails welded
to the unit engage with the one on the wall.
Ensure that the unit is level, then mark the wall through the remaining three attachment points,
two on the lower horizontal beam and one on the upper horizontal beam.
Remove the unit from the wall and at the three marked positions drill three 6mm full-depth pilot
holes.
Open the two to accept Anchor fixings. Open the upper hole to 10mm to accept a plastic wall
plug.
Fit the fixings and the plug into the wall.
Place the rise and fall unit back onto the wall-mounted rail. Fully fix the rise and fall unit to the
wall using suitable fixings.
Ensure that the mains supply to the junction box on the wall is switched OFF.
Electrically connect the rise and fall unit to the fused outlet behind the unit using the three-core
cable supplied. Ensure there is sufficient cable to allow the unit to rise and fall.
Ensure the handset is fitted BEFORE switching the power on.
Switch on the mains voltage, a light fitted next to the Handset socket on the right hand side of
the unit, should be illuminated.
•
•
•
•
•
•
•
•
•
•
•
•
•
Please Note: Due to the complexity of different building methods Astor
Bannerman do not supply installation fixings and anchors.