Aston Global AWB-139CML Скачать руководство пользователя страница 24

Страница: 24 / 30

www.astontechusa.com

Aston Magnetic Levitation Wheel Balancer AWB-139ML User’s Manual

Select the relevant weight and apply it as per the same procedure of weight application for OUTER

(right) plane described in section ALU-S PROGRAM.

Repeat the above described procedure to apply the relevant

weight behind the 2nd spoke.

Perform a test spin to check the accuracy

1.6.5

OPT – Match Mount Program

The OPT Program serves to reduce the amount of weight to be added for balancing a wheel, it is suitable

for static unbalance exceeding >30 grams (1.5 Oz).

⚫

Press keys to enter the OPT

program, the display shows as the picture

illustrated.

⚫

Spin the wheel, after the wheel stop, the display shows as

the picture illustrated.

This is to indicate user to remount

tire and rim assembly by turning 180 degrees.

To do this,

mark a reference line with chalk on the adaptor, tire wall

and the rim, take the wheel off the machine, use tire changer to turn the tire on the rim by 180 degrees.

⚫

Refit the wheel with the reference marks coinciding

between rim and adapter, perform a wheel spin, i.e..: the

display windows show as this picture illustrated: The left

display shows the actual weight static which can be reduced by matching, the right display shows

the reduction in percentage (%).

⚫

Rotate the wheel until the position

indication bars are showing as the picture

illustrated:

⚫

Mark a line on the tire at top center 12 o'clock position.

Содержание AWB-139CML































Результаты поиска

Содержание AWB-139CML

Отзывы:

Похожие инструкции для AWB-139CML

Бренды по названию

Популярные бренды

Aston Global AWB-139CML, Инструкция по установке, эксплуатации и использованию

Результаты поиска

Содержание AWB-139CML

Отзывы:

Похожие инструкции для AWB-139CML

Бренды по названию

Популярные бренды