ASTEK A33606-PCI-60-6A SAS-2, Руководство пользователя

Страница: 8 / 27

A33606-PCI-60-6A SAS-2 Expander User Manual
8
Copyright © 2014 by Astek Corporation. All rights reserved Ver. A
2 Installation Procedures
Hardware Installation
A33606-PCI-60-6A
The A33606-PCI-60-6A is intended to be installed directly to a chassis or PC case.
CAUTION Ground yourself before removing any electronic equipment or parts.
Step 1. Remove the A33606-PCI-60-6A from the ESD packaging and check that it is not
damaged.
Step 2. Insert the Expander card into the chassis. The mounting holes are sized to support
M3 or 4-40 hardware. Board dimensions and mounting hole locations are defined
in the Mechanical Specifications section.
Step 3. Attach a 4-pin power cable from the power supply to J13 (shown below). The
A33606-PCI-60-6A utilizes 12V input power.
Step 4. Attach the SAS HBA or RAID Card to the expander card.
For internal connection, connect the host to J5 using an SFF-8087 cable.
For external connection, connect the host to J2 using an SFF-8088 cable.
Step 5. Attach drives to the expander card. The mapping of drive number to connector is
shown below.
J2
J5