ASTEK A33606-PCI-60-6A SAS-2, Руководство пользователя

Страница: 13 / 27

A33606-PCI-60-6A Characteristics
Ver. A Copyright © 2014 by Astek Corporation. All rights reserved
13
Serial Port (RJ-11)
A Serial interface is available through a right angle RJ-11 connector (J42) accessible from the front panel.
This interface can be utilized for re-programming and debug of the expander. The pinout of the RJ-11 is
below.
Pin Signal Name Driver DB9 Pin
1 NC
2 NC
3 Tx A33606-AIC-01 2
4 Rx PC 3
5 Ground 7
6 NC
A compatible adapter for use with this interface is an Astek Corporation A40100-CBL-03. Other cables may
be utilized as long as they conform to the above pinout.
Heartbeat LED
When the system is powered on and the expander chip is functioning properly, the Heartbeat LED, D9, will
blink continuously.
External iPass (SFF-8088)
Two SFF-8088 ports are available on the front panel of the A33606-PCI-60-6A (J1 and J2). Each port
supports up to 4 lanes of SAS-2 6Gb/s traffic.
The table below shows the pin assignments for SFF-8088.
Pin Signal Name Pin Signal Name
A1 GND B1 GND
A2 RX0_P B2 TX0_P
A3 RX0_N B3 TX0_N
A4 GND B4 GND
A5 RX1_P B5 TX1_P
A6 RX1_N B6 TX1_N
A7 GND B7 GND
A8 RX2_P B8 TX2_P
A9 RX2_N B9 TX2_N
A10 GND B10 GND
A11 RX3_P B11 TX3_P
A12 RX3_N B12 TX3_N
A13 GND B13 GND
J1 is utilized for daisy-chain connections.