4
Components
Yale EC800 Digital Leverset
Strike
60mm Backset Latch
Before Installation
Tools Required
Door Preparation
●
54mm hole saw
●
25mm hole saw
●
Fixing
●
Phillips Head Screwdriver
●
Alkaline Batteries
Strike Box
Ya
le
Key x 2
M4x44mm
Machine
Screw x 3
20mm Timber
Screw x 4
44mm Timber
Screw x 1
Key Tag x 2
Exterior Furniture
Interior Furniture
(AAA x 4)
USER MANUAL
Comp
on
ents
Hold the
“SET”
button rstly and put batteries in until
four “beeps” sound heard ( within 5 second ), then
release the
“SET”
button.
The factory default PIN Code
000000
.
●
Register User PIN Code
●
Press and release
“SET”
button once.
in register mode.)
●
Register KeyCard(s)
Press and release
“SET”
button once.
in setting mode.)
Swipe the KeyCard on keypad induction zone.
(A long “beep” sound will be heard, if the registered
successfully.)
Three short “beep” sounds will be heard if the KeyCard
has been registered previously with the lock.
●
●
Deleting a Key Fob
Press and release
“SET”
button twice.
(The keypad light will turn red
in delete mode.)
●
Swipe the KeyCard on keypad induction zone.
(A long “beep” sound will be heard, if the deleting
successfully.)
Three short “beep” sounds will be heard if the KeyCard
has no data for delete.
●
Delete all the registered KeyCard(s)
Press and release
“SET”
button twice.
(The keypad light will turn red
in deleting mode.)
Enter
0000#
.
●
●
Usage
Open Door by PIN Code
●
●
Open Door by KeyCard
●
1.1
1.2
1.3
2.1
2.2
3.1
3.2
4.1
4.2
Spindle
with spring
14mm Spade Bit
●
Power Drill
Note: The lock will exit the setting mode after 8 seconds
if no operation or press “ * ” to exit the setting
mode.
Enter a new PIN Code ( 6 to 10 digits ) and press
“#”
.
(A long “beep” sound will be heard, if the registered
successfully.)
Note: To exit Resister mode press or the lock will
automatically exit the the mode after 8 seconds
of inactivity.
“ * ”
Note: The lock will exit the setting mode after 8 seconds
if no operation or press “ * ” to exit the setting
mode.
Note: The lock will exit the setting mode after 8 seconds
if no operation or press “ * ” to exit the setting
mode.
Touch the keypad. Enter 6~16 digits (PIN code and
fake PIN code) and press
“#”
The
sound will be heard if the PIN code is
correct. Then turn lever to open the door within 8
heard again and door will be locked.
(Fake PIN code can input before and after the PIN code.)
If the PIN code was not correct. The keypad light will
(PIN code and KeyCard for 5 consecuitive errors, the
system will be locked for 1 minute, and the keypad
light will become red and fresh.)
Touch the keypad. Swipe the KeyCard on keypad
induction zone. Then turn lever to open the door
within 8 seconds.
three short “beep” sounds if the KeyCard has not
been registered correctly.)
Ver1.03
Registering Credentials
Removing Credentials
Factory Reset
Yale EC800 Digital Leverset
Strike
60mm Backset Latch
Before Installation
Tools Required
Door Preparation
●
54mm hole saw
●
25mm hole saw
●
Fixing
●
Phillips Head Screwdriver
●
Alkaline Batteries
Strike Box
Ya
le
Key x 2
M4x44mm
Machine
Screw x 3
20mm Timber
Screw x 4
44mm Timber
Screw x 1
Key Tag x 2
Exterior Furniture
Interior Furniture
(AAA x 4)
USER MANUAL
Comp
on
ents
Hold the
“SET”
button rstly and put batteries in until
four “beeps” sound heard ( within 5 second ), then
release the
“SET”
button.
The factory default PIN Code
000000
.
●
Register User PIN Code
●
Press and release
“SET”
button once.
in register mode.)
●
Register KeyCard(s)
Press and release
“SET”
button once.
in setting mode.)
Swipe the KeyCard on keypad induction zone.
(A long “beep” sound will be heard, if the registered
successfully.)
Three short “beep” sounds will be heard if the KeyCard
has been registered previously with the lock.
●
●
Deleting a Key Fob
Press and release
“SET”
button twice.
(The keypad light will turn red
in delete mode.)
●
Swipe the KeyCard on keypad induction zone.
(A long “beep” sound will be heard, if the deleting
successfully.)
Three short “beep” sounds will be heard if the KeyCard
has no data for delete.
●
Delete all the registered KeyCard(s)
Press and release
“SET”
button twice.
(The keypad light will turn red
in deleting mode.)
Enter
0000#
.
●
●
Usage
Open Door by PIN Code
●
●
Open Door by KeyCard
●
1.1
1.2
1.3
2.1
2.2
3.1
3.2
4.1
4.2
Spindle
with spring
14mm Spade Bit
●
Power Drill
Note: The lock will exit the setting mode after 8 seconds
if no operation or press “ * ” to exit the setting
mode.
Enter a new PIN Code ( 6 to 10 digits ) and press
“#”
.
(A long “beep” sound will be heard, if the registered
successfully.)
Note: To exit Resister mode press or the lock will
automatically exit the the mode after 8 seconds
of inactivity.
“ * ”
Note: The lock will exit the setting mode after 8 seconds
if no operation or press “ * ” to exit the setting
mode.
Note: The lock will exit the setting mode after 8 seconds
if no operation or press “ * ” to exit the setting
mode.
Touch the keypad. Enter 6~16 digits (PIN code and
fake PIN code) and press
“#”
The
sound will be heard if the PIN code is
correct. Then turn lever to open the door within 8
heard again and door will be locked.
(Fake PIN code can input before and after the PIN code.)
If the PIN code was not correct. The keypad light will
(PIN code and KeyCard for 5 consecuitive errors, the
system will be locked for 1 minute, and the keypad
light will become red and fresh.)
Touch the keypad. Swipe the KeyCard on keypad
induction zone. Then turn lever to open the door
within 8 seconds.
three short “beep” sounds if the KeyCard has not
been registered correctly.)
Ver1.03
Registering Credentials
Removing Credentials
Factory Reset
Review inventory before starting install.
Tools Required
Door Preparation
• 54mm Hole Saw
• 25mm Hole Saw or Spade Bit
• 14mm Spade Bit
• 25mm Chisel
• 2.5mm Drill Bit
• Power Drill
• Tape Measure or Ruler
• Pencil
Fixing
• Phillips Head Screwdriver
• Alkaline Batteries AAA x 4 (included)
NOTE:
For 70mm backset applications please pair with a Yale
530 Latch Part No. Y530-222SC (sold separately).
Additional Key Tags (2-pack), Part No. YDLTAG (sold separately).
Specifications
•
Key Tag Memory:
Up to 100 Key Tags supported
•
PIN Code:
User configured PIN Code (6-10 digits)
•
Battery Type:
4 x AAA Alkaline
•
Operation Temperature Range:
-25C to +50C
•
Storage Temperature Range:
-40C to +55C
•
Relative Humidity:
Operable between 10% to 90% relative humidity
•
Automatically Locking:
Adjustable Automatic Locking Timer, configurable
between 5-60 sec (default: 8 sec)
