18
Feature Programming
Enable High Security Mode
Adjust Automatic Locking Timer (Default: 8 sec)
•
High Security Mode requires users to enter
their PIN code "
#
" as well as present a
registered Key Tag to gain entry.
•
To enable, press the "
SET
" button
three times, the keypad will flash
"Red" and "Blue".
•
Next press "
#
" to complete. A long "beep"
will sound if the mode change
was successful.
•
To disable High Security Mode, repeat the
process used to enable except pressing
"
*
" to complete instead of "
#
".
WARNING:
When programming the lock please ensure
that the door is open to prevent inadvertent lock outs.
•
Enter PIN code or tap Key Tag, followed
by entering "
8888#
" into the keypad and
then the preferred auto-locking time in
seconds (5-60) confirming by pressing
the "
#
" key.
•
If successful, a long "beep" will sound.
NOTE:
The programming time is limited to 8 seconds
after PIN entry or Key Tag tap for adjusting Automatic
Locking timer. If not, completed in this time period,
user will have to repeat steps above.
Reset
Button
Micro USB
Advanced Function
Passage Mode turn on
(Door without locking)
5.1
(A long “beep” sounds will be heard and unlock
indicator will be light on when keypad start if the lock
is
●
5.2
Press
“ * ”
when the passage mode has been turn on.
( A long “beep” sounds will be heard and unlock
indicator
5.3
●
High Security Mode turn on
Press and release
“SET”
button three times.
(
Then press
“#”
.
(A long “beep” sound will be heard if the lock is in high
security mode.)
●
●
5.4
Press and release
“SET”
button three times.
(
Then press
“ * ”
.
(A long “beep” sound will be heard if the lock exit high
security mode.)
●
●
Built In Function
Low battery alarm
6.1
almost run out.
Need to change new batteries.
●
●
Key Operation
6.6
Press end of the lever to open cover for unlock the
door by key (even batteries run out).
●
Power shortage
6.4
In the case o nsu
ient battery, t he lock can be
powered by USB port located under the panel of lock.
Note: PIN Code & KeyCard remained unchange.
●
●
KeyCard Memory:
100 KeyCards
PIN Code:
6 ~ 10 numerical digits
Card Readable Distance:
10mm below
Battery:
4 x AAA alkaline batteries
4.8V below
Static Consumption:
40uA below
Dynamic Consumption:
300mA below
Operation Temperature:
-25C ~ +50C
Storage Temperature:
-40C ~ +55C
Relative Humidity:
10% ~ 90%
Yale EC800 Digital Leverset
USER MANUAL
(Open the Door by both PIN Code and KeyCard)
No response
6.5
●
●
●
●
●
●
●
●
●
●
Yal
e
Press here
All dimensions in millimetres
Unlock Indicator
6.2
The unlock indicator light on (green) when allow to
open door by lever.
●
KeyCard Induction Zone
6.3
●
in passage mode.)
batteries
Press PIN code or swipe KeyCard, then press
“ * ”
within
8 seconds.
Best position for detecting KeyCard.
Press “Quick Restart” button if the lock is unresponsive.
Ver1.03
5.5 Adjustable auto locking time
By default automatically lock the door after 8 seconds.
Press PIN code or swipe KeyCard, then press
“ 8888 #
5~60 # ”
within 8 seconds.
(A long “beep”sounds will be heard if adjust the closing
time succesfully.)
●
●
Low Battery
Indicator
Unlock Indicator
Key Tag Indicator
Zone
Automatically locking
5~60s adjustable range (default 8s)
●
Reset
Button
Micro USB
Advanced Function
Passage Mode turn on
(Door without locking)
5.1
(A long “beep” sounds will be heard and unlock
indicator will be light on when keypad start if the lock
is
●
5.2
Press
“ * ”
when the passage mode has been turn on.
( A long “beep” sounds will be heard and unlock
indicator
5.3
●
High Security Mode turn on
Press and release
“SET”
button three times.
(
Then press
“#”
.
(A long “beep” sound will be heard if the lock is in high
security mode.)
●
●
5.4
Press and release
“SET”
button three times.
(
Then press
“ * ”
.
(A long “beep” sound will be heard if the lock exit high
security mode.)
●
●
Built In Function
Low battery alarm
6.1
almost run out.
Need to change new batteries.
●
●
Key Operation
6.6
Press end of the lever to open cover for unlock the
door by key (even batteries run out).
●
Power shortage
6.4
In the case o nsu
ient battery, t he lock can be
powered by USB port located under the panel of lock.
Note: PIN Code & KeyCard remained unchange.
●
●
KeyCard Memory:
100 KeyCards
PIN Code:
6 ~ 10 numerical digits
Card Readable Distance:
10mm below
Battery:
4 x AAA alkaline batteries
4.8V below
Static Consumption:
40uA below
Dynamic Consumption:
300mA below
Operation Temperature:
-25C ~ +50C
Storage Temperature:
-40C ~ +55C
Relative Humidity:
10% ~ 90%
Yale EC800 Digital Leverset
USER MANUAL
(Open the Door by both PIN Code and KeyCard)
No response
6.5
●
●
●
●
●
●
●
●
●
●
Yal
e
Press here
All dimensions in millimetres
Unlock Indicator
6.2
The unlock indicator light on (green) when allow to
open door by lever.
●
KeyCard Induction Zone
6.3
●
in passage mode.)
batteries
Press PIN code or swipe KeyCard, then press
“ * ”
within
8 seconds.
Best position for detecting KeyCard.
Press “Quick Restart” button if the lock is unresponsive.
Ver1.03
5.5 Adjustable auto locking time
By default automatically lock the door after 8 seconds.
Press PIN code or swipe KeyCard, then press
“ 8888 #
5~60 # ”
within 8 seconds.
(A long “beep”sounds will be heard if adjust the closing
time succesfully.)
●
●
Low Battery
Indicator
Unlock Indicator
Key Tag Indicator
Zone
Automatically locking
5~60s adjustable range (default 8s)
●
