background image

14

Lock Features

Low Battery Alarm

  When the lock detects low battery 

power, an "

Reset 

Button

Micro USB

Advanced Function

Passage Mode turn on  

(Door without locking)

5.1

(A long  “beep” sounds will be heard and unlock 

indicator will be light on when keypad start if the lock 

is

5.2

Press  

“ * ”

  when the passage mode has been turn on. 

( A long “beep” sounds will be heard and unlock 

indicator

5.3

High Security Mode turn on

Press and release  

“SET”

  button three times.

(

Then press  

“#”

  .

(A long “beep” sound will be heard if the lock is in high

 security mode.) 

5.4

Press and release  

“SET” 

 button three times.

(

Then press  

“ * ”

  .

(A long “beep” sound will be heard if the lock exit high

 security mode.) 

Built In Function

Low battery alarm

6.1

almost run out.

Need to change new batteries.

Key Operation

6.6

Press end of the lever to open cover for unlock the 

door by key (even batteries run out).

Power shortage

6.4

In the case o nsu

ient battery, t he lock can be 

powered by USB port located under the panel of lock.

 

Note: PIN Code & KeyCard remained unchange. 

KeyCard Memory:

100 KeyCards
PIN Code:

6 ~ 10 numerical digits
Card Readable Distance:

10mm below
Battery:

4 x AAA alkaline batteries

4.8V below
Static Consumption:

40uA below
Dynamic Consumption:

300mA below
Operation Temperature:

-25C ~ +50C
Storage Temperature:

-40C ~ +55C
Relative Humidity:

10% ~ 90%

Yale EC800 Digital Leverset

USER MANUAL

(Open the Door by both PIN Code and KeyCard)

No response

6.5

Yal

e

Press here

All dimensions in millimetres

Unlock Indicator

6.2

The unlock indicator light on (green) when allow to 

open door by lever.

KeyCard Induction Zone

6.3

in passage mode.) 

batteries

Press PIN code or swipe KeyCard, then press  

“ * ”

 within

8 seconds. 

Best position for detecting KeyCard.

Press “Quick Restart” button if the lock is unresponsive.

Ver1.03

5.5 Adjustable auto locking time

By default automatically lock the door after 8 seconds.

Press PIN code or swipe KeyCard, then press 

“ 8888 #

 

5~60 # ” 

within 8 seconds.

(A long “beep”sounds will be heard if adjust the closing 

 time succesfully.)

Low Battery

Indicator

Unlock Indicator

Key Tag Indicator

Zone

Automatically locking

5~60s adjustable range (default 8s)

" indicator light will 

illuminate on the top of the keypad.

  The user is encouraged to replace the 

batteries as soon as possible to avoid 
interrupted use of the lock.

PIN Code Masking

  If the user wishes to prevent someone 

nearby from seeing their PIN code they 
can mask it by entering additional numbers 
either before or after the PIN.

  To mask the PIN, the user must have 

previously programmed a PIN code  
(6-10 digits). 

  To unlock, tap the keypad to wake-up the 

lock and then enter up to 16 digits using 
either false leading and/or trailing numbers, 
confirm by pressing the "

#

" key.

EXAMPLE:

 If the PIN code is "

123456

", user could mask 

by entering "

321123456

" to hide the PIN from those 

nearby. Confirm the entry by pressing "

#

" to unlock.

After five consecutive failed attempts, the keypad will 
become disabled (flashing red) for 1 min.

NOTE: 

that within the sequence the user must enter the 

correct PIN code or access will not be granted. 

Reset 

Button

Micro USB

Advanced Function

Passage Mode turn on  

(Door without locking)

5.1

(A long  “beep” sounds will be heard and unlock 

indicator will be light on when keypad start if the lock 

is

5.2

Press  

“ * ”

  when the passage mode has been turn on. 

( A long “beep” sounds will be heard and unlock 

indicator

5.3

High Security Mode turn on

Press and release  

“SET”

  button three times.

(

Then press  

“#”

  .

(A long “beep” sound will be heard if the lock is in high

 security mode.) 

5.4

Press and release  

“SET” 

 button three times.

(

Then press  

“ * ”

  .

(A long “beep” sound will be heard if the lock exit high

 security mode.) 

Built In Function

Low battery alarm

6.1

almost run out.

Need to change new batteries.

Key Operation

6.6

Press end of the lever to open cover for unlock the 

door by key (even batteries run out).

Power shortage

6.4

In the case o nsu

ient battery, t he lock can be 

powered by USB port located under the panel of lock.

 

Note: PIN Code & KeyCard remained unchange. 

KeyCard Memory:

100 KeyCards
PIN Code:

6 ~ 10 numerical digits
Card Readable Distance:

10mm below
Battery:

4 x AAA alkaline batteries

4.8V below
Static Consumption:

40uA below
Dynamic Consumption:

300mA below
Operation Temperature:

-25C ~ +50C
Storage Temperature:

-40C ~ +55C
Relative Humidity:

10% ~ 90%

Yale EC800 Digital Leverset

USER MANUAL

(Open the Door by both PIN Code and KeyCard)

No response

6.5

Yal

e

Press here

All dimensions in millimetres

Unlock Indicator

6.2

The unlock indicator light on (green) when allow to 

open door by lever.

KeyCard Induction Zone

6.3

in passage mode.) 

batteries

Press PIN code or swipe KeyCard, then press  

“ * ”

 within

8 seconds. 

Best position for detecting KeyCard.

Press “Quick Restart” button if the lock is unresponsive.

Ver1.03

5.5 Adjustable auto locking time

By default automatically lock the door after 8 seconds.

Press PIN code or swipe KeyCard, then press 

“ 8888 #

 

5~60 # ” 

within 8 seconds.

(A long “beep”sounds will be heard if adjust the closing 

 time succesfully.)

Low Battery

Indicator

Unlock Indicator

Key Tag Indicator

Zone

Automatically locking

5~60s adjustable range (default 8s)

Reset 

Button

Micro USB

Advanced Function

Passage Mode turn on  

(Door without locking)

5.1

(A long  “beep” sounds will be heard and unlock 

indicator will be light on when keypad start if the lock 

is

5.2

Press  

“ * ”

  when the passage mode has been turn on. 

( A long “beep” sounds will be heard and unlock 

indicator

5.3

High Security Mode turn on

Press and release  

“SET”

  button three times.

(

Then press  

“#”

  .

(A long “beep” sound will be heard if the lock is in high

 security mode.) 

5.4

Press and release  

“SET” 

 button three times.

(

Then press  

“ * ”

  .

(A long “beep” sound will be heard if the lock exit high

 security mode.) 

Built In Function

Low battery alarm

6.1

almost run out.

Need to change new batteries.

Key Operation

6.6

Press end of the lever to open cover for unlock the 

door by key (even batteries run out).

Power shortage

6.4

In the case o nsu

ient battery, t he lock can be 

powered by USB port located under the panel of lock.

 

Note: PIN Code & KeyCard remained unchange. 

KeyCard Memory:

100 KeyCards
PIN Code:

6 ~ 10 numerical digits
Card Readable Distance:

10mm below
Battery:

4 x AAA alkaline batteries

4.8V below
Static Consumption:

40uA below
Dynamic Consumption:

300mA below
Operation Temperature:

-25C ~ +50C
Storage Temperature:

-40C ~ +55C
Relative Humidity:

10% ~ 90%

Yale EC800 Digital Leverset

USER MANUAL

(Open the Door by both PIN Code and KeyCard)

No response

6.5

Yal

e

Press here

All dimensions in millimetres

Unlock Indicator

6.2

The unlock indicator light on (green) when allow to 

open door by lever.

KeyCard Induction Zone

6.3

in passage mode.) 

batteries

Press PIN code or swipe KeyCard, then press  

“ * ”

 within

8 seconds. 

Best position for detecting KeyCard.

Press “Quick Restart” button if the lock is unresponsive.

Ver1.03

5.5 Adjustable auto locking time

By default automatically lock the door after 8 seconds.

Press PIN code or swipe KeyCard, then press 

“ 8888 #

 

5~60 # ” 

within 8 seconds.

(A long “beep”sounds will be heard if adjust the closing 

 time succesfully.)

Low Battery

Indicator

Unlock Indicator

Key Tag Indicator

Zone

Automatically locking

5~60s adjustable range (default 8s)

Содержание Yale YDLL/BLK

























Отзывы: