Assa Abloy Sargent Signature Series Скачать руководство пользователя страница 4

Страница: 4 / 12

Signature

Series

The SARGENT Signature feature is the interaction of unique components loaded into standard

production cylinder parts modified to accept these components.

How are the Cylinder Parts Modified?

The parts which are modified to accommodate the Signature components

are the cylinder barrel, cylinder body and key blank. Modifications of these

parts involve: milling and drilling the cylinder barrel, broaching grooves in

the barrel chamber of the cylinder body and drilling dimples on

both sides of the key blanks.

What Are The Signature Components?

The components that make up the Signature feature are:

A • six (6) Signature Side Pins

B • two (2) Keyway Blocking Pins

C • six (6) Side Pins and Keyway Blocking Pin Springs

D • six (6) Side Pins and Keyway Blocking Pin Caps

E • four (4) Blocking Bar Springs (part no. 13-0986)

F • two (2) Blocking Bars (part no.13-0985) or 13-1109

In order for the Signature feature to function, three holes are first drilled on each side of the

Signature cylinder’s barrel. The location of these drill holes creates the basis for the Signature

pattern in both the cylinder and the key blank.

Two channels are then machined from front to back in the bottom of the cylinder barrel,

one on each side of the keyway broaching.

Order No. 13-0985

For cylinders with patent pending on keys or

Feather logo opposite key way on bow

(“V” groove or no witness mark)

Order No. 13-1109

For cylinders with patent No. 5,475,998 on keys or

Feather logo above Patent

(Radius groove)

For cylinders with patent # 5,475,998 on key or “PAT.”

below Feather logo

(see below)

Signature Feature Description

*Note:

Parts A, B, and C are factory installed. Removal voids all warranty.

Two corresponding grooves are then machined in the bottom of the body.

1-800-727-5477 • www.sargentlock.com • A7438F

9/01/16

2007, 2011, 2014, 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibite

Содержание Sargent Signature Series













Результаты поиска

Содержание Sargent Signature Series

Отзывы:

Похожие инструкции для Sargent Signature Series

Бренды по названию

Популярные бренды

Assa Abloy Sargent Signature Series, Инструкция по информации и полевому обслуживанию

Результаты поиска

Содержание Sargent Signature Series

Отзывы:

Похожие инструкции для Sargent Signature Series

Бренды по названию

Популярные бренды