Assa Abloy Sargent Signature Series Скачать руководство пользователя страница 8

Страница: 8 / 12

Signature

Series

SARGENT has developed the Signature Series cylinder to be very simple to maintain and service. In keeping with

this concept, SARGENT has a pin kit (catalog part #437S) and tools to assist in the field servicing of the Signature

cylinder.

Components of the Signature Pin Kit

The pin kit contains 100 each of all the standard pins and springs required to accomplish pinning the master keying of

the removable core cylinder. It also contains the necessary tools for assembling Signature featured cylinders.
When rekeying 10-6300 Signature Removable Core Cylinders, 437 RC/UL Rekeying Kit is needed in conjunction

with 437S.
SARGENT created two types of barrel loading rods (part #13-1034, 13-1035). These followers are uniquely

configured at each end to accommodate the different barrel configurations for the different types of Signature

cylinders (mortise, rim, cylindrical).

The blocking bars (part #13-0985 and 13-1109) and blocking bar springs (part #13-0986) are part of the

Signature pinning kit.

DETERMINE STACK HEIGHT OF DRIVERS. SELECT

CORRECT PINS FOR EACH DRIVER CHAMBER. INSERT

PINS INTO CORRECT HOLE LOCATIONS IN LOADING ROD.

(START BY FILLING THE HOLE CLOSEST TO THE

CYLINDER BODY).

LOAD SPRINGS INTO LOADING ROD HOLES.

USE SPRING BLADE TO COMPRESS SPRINGS. (SPRING

BLADE MUST BE FLUSH WITH LOADING ROD).

SLIDE PIN LIFT BLADE INTO LOADING ROD. (THIS WILL

LIFT PINS INTO CYLINDER BODY PIN CHAMBERS).

The loading rods have also been machined to simplify the loading of the Signature cylinder outer body with driver

pins and springs (a standard part of the master keying process).

A spring depressing tool (part #13-1138) and a transfer knife (part #13-1037) are included to assist in transferring

the driver and spring loads to the Signature cylinder body.

There is a set of tweezers with tips specially designed for

picking up cylinder pins.

There is a field service tool (part #13-3916) that

has been included to assist in loading or re-orienting

the blocking bars.

REMOVE CAP FROM SERVICE TOOL BASE BY PRESSING

SIDES OF CAP TO RELEASE SNAPS. INSERT CYLINDER

PLUG WITH KEY INTO BASE OF SERVICE TOOL.

13-1138

13-1037

PIN 13-1034

PIN 13-1035

Signature Pin Kit

1-800-727-5477 • www.sargentlock.com • A7438F

9/01/16

2007, 2011, 2014, 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibite

Содержание Sargent Signature Series













Результаты поиска

Содержание Sargent Signature Series

Отзывы:

Похожие инструкции для Sargent Signature Series

Бренды по названию

Популярные бренды

Assa Abloy Sargent Signature Series, Инструкция по информации и полевому обслуживанию

Результаты поиска

Содержание Sargent Signature Series

Отзывы:

Похожие инструкции для Sargent Signature Series

Бренды по названию

Популярные бренды