manualshive.com logo in svg

Assa Abloy Sargent Profile v.S1, Руководство по установке

Поделиться
Скачать
Assa Abloy Sargent Profile v.S1 Скачать руководство пользователя страница 6

Copyright © 2011, Sargent Manufacturing Company

, an ASSA ABLOY Group company

. All rights reser

ved. 

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

02/11/11

Profile Series v.S1 PoE Cylindrical Lock       

6           A7763B                

PoE Door Harness

Order of installation may vary. Refer to appropriate sections for instructions. 
1.  Prop door open.
2.  Tape the two lock-side 4-pin connectors to the ring terminal.
3.  Using the ring terminal, carefully fish the assembly through the door channel to the lock. 
4.  Remove tape from ring terminal and door harness connectors. 

Hinge-side harness connectors:
•  4-pin male Molex connector
•  6-pin male Molex connector with ground wire
Lock-side harness connectors:
•  Ring terminal 
•  (2) 4-pin connectors

Ground

4-Pin 

4-Pin

6-pin M

Cable

: CAT 5e,

26 AWG stranded,

shielded, 100ohm

Ring Terminal Secured 

to Lock Mounting Plate

4-pin F

Drain.Wire

Installation Wiring (Continued)

PoE.Lock

C

Содержание Sargent Profile v.S1





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды