Assa Abloy Sargent Profile v.S1 Скачать руководство пользователя страница 3

Страница: 3 / 20

02/11/11

A7763B 3

t Manufacturing Company

, an A

A AB

Y G

roup company

. All right

s reser

ved

Reproductions in whole or in par

t without express writ

ten permission of Sargen

t Manufacturing Company is prohibited

Profile Series v.S1 PoE Cylindrical Lock

General Description

The SARGENT Profile Series v.S1 cylindrical lock is available with either an HID

Prox 125 kHz or 13.56 MHz

iCLASS

technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet)

technology as a proven alternative to traditional access control installations. The v.S1 is a self-contained

microprocessor-controlled access control product with non-volatile memory. It uses the existing network cable

to communicate with access control systems. The v.S1 lock holds a total of 2400 unique users per lock.
Using PoE technology coupled with approved third party software, this v.S1 online lock offers a complete, inte-

grated access control system.
The Profile Series v.S1 cylindrical lock may be used for both indoor and exterior applications. A weather-

protective gasket is recommended for exterior applications.

HID and iCLASS are registered trademarks of HID Global Corporation.

Hardware Specifications

•  Complete lockset with on-board memory
•  Available with or without keypad
•  ADA compliant, non-handed
•  Latch: 1/2" standard

3/4" throw for fire rated doors

(optional) (41- prefix)

•  Deadlocking latch
•  Inside lever retracts latch
•  ANSI/BHMA Grade 1; UL Listed

Electronic Specifications

• 2400 users per lock; 10,000 event audit trail
• Multiple time zone and holiday

access scheduling

•  Centralized lock management
•  Real time door status monitoring
•  First-In unlock configuration, either by time

or by user (selectable)

• Lock down capable
• Input Power: PoE Class 2 Device, as defined

by IEEE 802.3af

• Supports HID® 125 kHz prox or 13.56 MHz

iCLASS® credentials (26 - 39 bit); supports

CSN reads for other common 13.56 MHz cards,

including MiFare, DesFire, and Felica

• Locks furnished for 1-3/4" and 1-3/8"

doors only

• Wire from EAC Panel to door must be

shielded with a drain (drain terminated

at EAC Panel controller)

Installation Wiring Overview

Supplied.by.Others

A. PoE Frame harness assembly
B. PoE data hinge from McKinney

(patent pending)
C. PoE door harness* from McKinney
D. DPS: Door Position Switch

(cylindrical and exit devices only)
E. Profile Series v.S1 PoE lock
* Door width determines length

Network.Cable

Network.Switch.(802.3af)

Surface.Mount.RJ45

Содержание Sargent Profile v.S1





















Результаты поиска

Содержание Sargent Profile v.S1

Отзывы:

Бренды по названию

Популярные бренды

Assa Abloy Sargent Profile v.S1, Руководство по установке

Результаты поиска

Содержание Sargent Profile v.S1

Отзывы:

Бренды по названию

Популярные бренды