Copyright © 2011, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
02/11/11
Profile Series v.S1 PoE Cylindrical Lock
12 A7763B
Step #2 – Install Strike
Step #3 - Install Latchbolt
1. Install latch with beveled bolt facing the strike.
2. Attach with two screws but DO NOT tighten
completely at this time.
Fig...3B
Strike
IMPORTANT: Latch bevel must match door bevel and
deadlocking latch must stop on strike when door is closed.
Deadlocking Latch
Outside.of.Door
Fig..3A
Install strike in the door frame (Fig.2A).
Fig...2A
Centerline of Latch
Front and Strike
(2) #8-32 x 3/4"
Latch Screws
Step #4 – Door Options
A..Fire.Stop.Plate.(P/N.52-0033)
Fire-rated doors require a fire stop plate on
the outside of the door (Fig. 4A).
1. Drill (2) 1/8" x 1-1/4" deep holes in the
door if not already present.
Refer to template for fire-stop
prep locations.
2. Attach with flap up and
out using (2) #8 x 1/2”
self-tapping screws for
wood and metal doors.
Fig.4B
B..Weather.Conduit.(52-2847)
Install weather conduit on
NON.FIRE-RATED
exterior doors only (Fig. 4B).
1. Carefully insert the weather conduit into the
ribbon cable hole on the inside of the door.
2. Place the O-ring around the weather conduit
on the outside and up against the door (Fig. 4C)
Outside.of.Door
(2) 1/8” Diameter
Holes Required
Fire Stop Plate
(2) #8 Self-Tapping
Screws for Wood
and Metal Doors
(2) Through-bolt Holes
Fig..4A
Fig.4C
Ribbon Cable Hole
O-Ring
Outside.of.Door
