01/31/14
1-800-810-WIRE • www.sargentlock.com • A7855C 13
Copyright © 2014, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
Profile Series v.G1.5/LK Mortise Lock
Tabs
Fig. 13A
Retaining Slots
Step #13 – Install Inside Cover
1. Attach inside cover to escutcheon making
sure to line up tabs with retaining
slots in cover.
2. Secure with security screw using
provided security tool Fig. 13A).
Step #12 – Install and Remove Batteries*
A. Install Batteries and Keeper
1. Place (6) “AA” batteries into the compartment, being careful to properly align polarity (Fig. 12A).
2. To install battery keeper, insert the tabs on the bottom of the keeper into the battery compartment slots
and press the keeper tightly against batteries and inserting tabs into bottom slots.
• For RF technology, use RF Technology lock information “RF Technology Lock” on page 14.
IMPORTANT
:
*
Do not install batteries if controller is powered by external power supply.
• Test for proper operation before closing door.
B. Remove Battery Keeper
To remove the battery keeper, pull the keeper away from the batteries (Fig. 12B).
Fig. 12B
+
-
+
+
-
+
Fig. 12A
Bottom Tabs
(Battery Keeper)
Keeper Tabs
Battery Keeper
Tip Out
