Copyright © 2017-2022, ASSA ABLOY Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
23
10
12
13
Cylinder Housing
Assembly Post
Glass Door
5
Install Mating Pull
3.3.4
5
Mating Pull Assembly
q
Mating Pull-Cylinder Housing Assembly
e
Door Gasket
r
Door Bushing
• Place the Mating Pull Assembly
5
on the Door.
• Install the Mating Pull-Cylinder Housing Assembly
q
with the Door Gasket
e
through the holes in the Glass Door.
• Make sure that the posts that are sticking out from the Mating Pull Cylinder
Housing Assembly
q
go through the Door Bushing
r
.
15
17
16
5
11
Glass Door
14
t
Actuator Post Assembly
w
Cylinder Housing
y
Push Rod
i
Flat Head Socket Cap Screw (
1
/
4
"
-20)
u
Spring Tube-Spring
Install Actuator Post Assembly
3.3.5
• Install the Actuator Post Assembly
t
on top of the opening in the Glass
Door to attach to the Cylinder Housing
w
.
• Make sure that the Push Rod
y
goes through the bottom hole.
• Apply a small drop of Threadlocker to the threads of the Flat Head Socket
Cap Screw (
1
/
4
"-20)
i
.
• Install the Flat Head Socket Cap Screw (
1
/
4
"-20)
i
and secure until tight.
CAUTION:
Make sure that the Spring Tube-Spring
u
and the Push Rod
y
are inserted into the Actuator Post Assembly
t
.
