Copyright © 2017-2022, ASSA ABLOY Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
14
6
Adapter Block
8
Interior Pivot Bracket Post
1
Panic Device Assembly
e
Set Screw Pin (
1
/
4
"-20)
7
Socket Cap Screw (5/16"-18) (x2)
5
Mating Pull Assembly
h
Conehead Union (5/16"-18)
k
Set Screws (
1
/
4
"-20)
Install Panic Device on Rail Mount Door
2.3.9
Door Rail
7
6
8
1
7
• Push the Adaptor Block
6
forward to expose the Interior Pivot Bracket
Post
8
.
• Use the tilt method to install the Panic Device Assembly
1
.
Refer to
Section 2.2.2 on page 9.
• Install the Panic Device Assembly
1
on the Interior Pivot Bracket Post
8
that is attached to the Adaptor Block
6
.
• Apply a small drop of Threadlocker to the threads of the Set Screw Pin
(
1
/
4
"-20
e
.
• Install the Set Screw Pin (
1
/
4
"-20)
e
.
• Align the Adaptor Block
6
with threaded holes (
5
/
16
"-18) inside of the
Door Rail.
• Apply a small drop of Threadlocker to the threads of the Socket Cap
Screws (
5
/
16
"-18)
7
.
• Install the Socket Cap Screws (
5
/
16
"-18)
7
and secure until tight.
• Apply a small drop of Threadlocker to the threads of the Set Screws
(
1
/
4
"-20)
k
.
• Tighten down both Set Screws (
1
/
4
"-20)
k
.
A
A
B
27
25
27
Glass Door
5
B
12
C
C
