8
Lockwood SMARTair
™
Portable Programmer
assaabloy.co.nz
F2 Key explained – DOORS MENU
By pressing F2 on the main screen of the Portable Programmer we access the Doors menu. This menu includes the ensuing operations:
Update
The Update function is used when we need to transfer changes made in the locking plan of a door to an Escutcheon or Reader. That is an
Escutcheon or Reader that has already been “initialised” and therefore already belongs to the installation.
Once we have made the necessary changes in the TS1000 management software, we send the data to the portable programmer. From there they
are transmitted to the Escutcheon or Reader by means of the Update function.
With the Authorisation Key inserted in the Portable Programmer and the PP connected to the door, press the “OK” to proceed with the Updating.
To carry out the functions Update, Initialise and Open successfully, the Authorisation Key of the installation License must be inserted in the
Portable Programmer.
If any of these operations are attempted without inserting the Authorisation
Key, on the PP we will see an Error message such as the one in the
following illustration:
As the Escutcheons or Readers have already been initialised and therefore
registered in the installation, the Portable Programmer will recognise which
door it is and immediately update it. The screen of the PP will show:
Once the Portable Programmer finishes the operation, the following screen
will be shown. Press (F5), to accept and go back to the main menu of the
Portable Programmer.
• Update
• Initialise
• Open
• Test
• Manufacturing
