Introduction
The SmartAir Access Control system is based mainly on products either running autonomously, running without connection to a Management
computer, or Wireless Online where they do communicate continuously with the SmartAir Management software server.
In the SmartAir range of Escutcheons, Cylinders and E-Motion Cabinet Locks, the control units operate purely on batteries, negating the need for
wiring to access control points. The great advantage of these products is that they can be installed on any door, without wiring and greatly reduce
installation time, costs and risk of damage. Wall Readers are also available to control Auto Gates & Doors or doors fitted with Electromechanical or
Electromagnetic locks. Wall Readers are powered using an external 12VDC power source.
The Portable Programmer is used to transfer information from the SmartAir TS1000 Management Software server to the SmartAir field devices.
It can also be utilised to retrieve information from SmartAir field devices including events and configuration data.
Portable Programmer Power
The Portable Programmer is powered with a 6LR61 type 9V DC Transistor alkaline battery.
The programmer switches itself off if it has not been used for 30 seconds to prevent leaving the programmer on when not in use.
The memory of the Portable Programmer is volatile, and hence if we remove the battery or if the battery runs down it will lose all information stored.
The battery is housed on the bottom base of the Portable Programmer. To extract it, remove the bottom lid of the Portable Programmer.
The Portable Programmer also has an indicator which displays the battery charge level.
2
Lockwood SMARTair
™
Portable Programmer
assaabloy.co.nz
Battery charge
state indicator
There is also a jack on the bottom of the Portable Programmer for connection of an external 9VDC supply.
