Configuring Rain Sensor Function:
RAIN SENSOR SETUP continued
Removing Rain Sensors from Zones continued:
3. Use the
arrow
keys to scroll to the desired Zone and match it
with the desired Rain Sensor.
4. Press
Remove from Zone.
5. Confirm your selection by pressing
Yes
.
A confirmation screen will be displayed and then the system will
return to the Remove From Zone page.
Note: The Rain Sensor will no longer be displayed on the left hand
side once removed from the Zone.
6. Press
Exit & Save
once all desired Rain Sensors have been removed.
Note: Restore Previous will not restore Rain Sensor settings.
These will be deleted. See page 11.
There are options in the Rain Sensor Setup page that allow you to
set the way the
Zones
react in the event of rain.
These options are :
•Disable or Enable
Reopen:
in the event of rain, the Actuators
will close. If Enable Reopen is selected the Actuators will
automatically reopen to their previous positions once the
Rain Sensor has dried.
•Shut or Vent: in the event of rain the Actuators will move
to this position.
The above options are customized as follows:
1. Press
Configure Functions.
16
3
