3. Press the
Actuator
button on the left.
The corresponding Actuator will open.
4. Locate this Actuator then use the
arrow
keys on the right
to select the desired Zone.
Once matched press
Add to Zone
and confirm your selection.
Important: Repeat the process ensuring
all
Actuators are allocated
to your desired Zones
before
exiting and saving.
5. Press
Exit & Save
, and then
Yes
to save your modified Zone settings.
Note: Serial Number location method can be used if required,
see page 5
.
MODIFYING SYSTEM CONFIGURATION continued
Adding Actuators to Zones continued:
2. Press
Add To Zone.
This now takes you to a screen where you can add
Actuators
to Zones.
10
