Assa Abloy Hi-O Technology OneSystem N5950, Инструкция по установке и монтажу

Страница: 39 / 88

39
Inputs and outputs
EN
Status messages / LEDs
LEDs (Fig. 2) are used to display the statuses of the inputs and outputs (relays).
LED Meaning
1 : Input illuminated It input is closed against GND
2 : Relay (output) illuminated The relay is activated / active
In addition, the operational availability is displayed using three LEDs.
LED 1
(red) LED 2
(green) Status of the IO module
– X IO module is online and ready for operation
flashing flashing IO module is offline or starting up
(the automatic initialisation is running)
Fig. 2 :
LEDs on housing cover
Fire alarm
External unlocking
External door contact
Central locking
Handle inside
Key cylinder contact
Clutch monitoring
Unlocked
Locked
Door closed
Alarm / Fault
Status
N5950
no USB D00852
Handle outside
Door operator
1 2
LED 1 LED 2
Organise products in Hi-O groups
The Hi-O Technology™ products are assigned to two Hi-O groups via DIP switches. The products’ digital
communication is always conducted exclusively within the assigned Hi-O groups.
For instance, the locks of a double-leaf door with separate monitoring of the active and inactive leaf can be
controlled separately via two separate IO modules. One lock forms Hi-O group 0 with its IO module, while
the other one forms Hi-O group 1 with its IO module (“DIP switch”, page 42, and Fig. 8).