For installation assistance contact Corbin Russwin
1-888-607-5703 • [email protected]
7
FM339 10/18
Push/Pull (HPSK) Paddle Trim
ML2000 Series Mortise Lock
Installation Instructions
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
Figure 20
Figure 22
3
HPSK Trim Installation
11. Install insert on paddle based on desired paddle
orientation. (Figure 23)
Figure 26
Figure 24
CAUTION:
- SCREWS MUST BE POSITIONED BEHIND
PADDLE TO WORK PROPERLY
- Cover will be very difficult to remove if
forced on backwards
Figure 25
12. Attach paddle to chassis by aligning paddle
as shown then insert axle through pivot hole
in chassis. (Figure 24)
13. Install cover using 5/16" oval head mounting
screws. (Figure 25)
14. Install scalp using 3/16" Flat Head Screws.
(Figure 26)
Vertical Paddle UP
Vertical Paddle DOWN
Horizontal Paddle
=
=
OR
Paddle Insert
Paddle Insert
Figure 23
NOTE:
COVER HOOKS UNDERNEATH CHASSIS
ON SIDE OPPOSITE MOUNTING SCREWS
SCALP
