6
ED8200 Series
Installation Instructions
Low Profile Rim Exit Devices - Reversible
FM37 04/20
Copyright © 2011, 2020ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
6
Test Push Bar and Dogging Operation
No-Trim Series:
Latch bolt is retracted by the push bar inside.
Pull and Plate Trim Series:
Latch bolt is retracted by the push bar inside and the key outside. Turning the key in either direction
will retract the latch. Return key to the horizontal position to remove key and project latch.
Knob Trim Series:
Latch bolt is retracted by the push bar inside and the key or knob outside.
To lock knob: Insert key in cylinder and turn counterclockwise as far as the key will turn. Then return it
to its vertical position and withdraw key.
To unlock knob: Insert key in cylinder and turn clockwise as far as the key will turn (the latch will retract
during this procedure). Then return the key to its vertical position and withdraw key.
Dogging: Depress push bar. Insert dogging wrench and turn clockwise 90°. The push bar will remain
depressed and the latch will remain retracted.
7
To Remove and Reinstall Cylinder in Knob
