4
ED8200 Series
Installation Instructions
Low Profile Rim Exit Devices - Reversible
FM37 04/20
Copyright © 2011, 2020ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
3
Install Trim and Strike, continued
a
Knob Trim, continued
b
Pull and Plate Trim
Caution: Refer to template packed with trim before proceding with Step 3.
Caution: When using the ANSI cylinder plate, the bosses on the latch assembly must fit into the
cutouts on the cylinder plate so that the latch assembly lays flat on the door.
