8) Operational Check
For mortise locks with cylinders:
a. Insert key into cylinder and rotate: There should be no friction
against lock case, wire harness or any other obstructions.
b. The key will retract the latch: Key should rotate freely.
c. Inside lever: Ensure it retracts the latch.
d. Close door: Ensure latch fully extends and does not bind.
e. Ensure that dead bolt can be projected and retracted by key and inside turn (if present).
f. Check powered lock and unlock function.
g. Throw dead bolt.
The lock should not lock or unlock (from outside of door) when dead bolt is projected.
PHR Function Check (if ordered):
Lock/UnLock Check:
a. Turn power ON.
b. Send unlock signal from control panel.
c. Verify lock unlocks and re-locks at desired intervals.
Switch Signal Check:
d. Monitor switch signals at control panel and verify each switch activates correctly based on
chosen wiring configuration (NO/NC).
e. If end-of-line resistors are present on the RX (request-to-exit) and door status outputs, verify
correct signaling by referencing instruction sheet FM406.
Feature
WT1
WT2
12 or 24VDC solenoid
lock voltage adjustable
X
X
Operates as Fail Safe or
Fail Secure
X
X
"Learn" mode allows
testing of specific cards
without programming at
the panel level
X
X
Card reader data inte-
grity is validated at test
unit
X
X
Works with SE LP10
X
X
Displays detailed
Wiegand data, including
hexadecimal string and
total bits received
X
Displays measured end-
of-line resistor values
(if applicable)
X
The ASSA ABLOY
Wiegand Test Unit
verifies your installation in
the field. The test unit checks for proper wiring, card reader data
integrity, lock functionality including lock/unlock, door position
status, and request-to-exit (REX) status.
In addition, this tool provides product demonstration abilities to
highlight the product’s features and capabilities.
Wiegand Test Unit
15
EcoFlex
™
Electrified Mortise Locks (NAC-)
with High-Security Monitoring Options
Installation and Wiring Instructions
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express
written permission of ASSA ABLOY Access and Egress Hardware Group, Inc.
is prohibited.
