24
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Resource Configuration
PCI
32
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
Configure SDRAM Timing by SPD: Select [Enabled] will configure the
following 3 items by the contents in the SPD (Serial Presence Detect)
device.
SDRAM RAS# Precharge:
This controls the idle clocks after a precharge command is issued.
SDRAM RAS# to CAS# Delay:
This controls the latency between the SDRAM active command and
the read / write command.
SDRAM Precharge Delay:
This controls the number of DRAM clocks for RAS minimum.
Resource Configuration:
PCI Latency Timer (PCI Clocks): The default is 32. We recommend you to
keep the default value unless your PCI expansion cards’ specifications
require other settings.
Primary Graphics Adapter: Select PCI or AGP as the primary graphics adapter.
