23
Chipset Configuration:
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. We recommend that you leave this field at the
default value unless your AGP card requires other sizes.
ICH Delayed Transaction: Select [Enabled] will enable delayed transactions
for internal register, FWH, and LPC interface accesses.
USB Controller: Use this to enable or disable the use of USB controller.
USB Device Legacy Support: Use this to enable or disable support to emulate
legacy I/O devices such as mouse, keyboard,... etc.
CPU Thermal Throttling: Select [Enabled] will enable P4 thermal control
circuit to keep CPU from overheated.
DRAM Write Throttling: Select [Enabled] will reduce the temperature of North
Bridge and DRAM. However, it will decrease the memory writing
throughput.
AGP/PCI Frequency: The defaul value is [Auto], or you may select among
other four sets of configuration options as the AGP/PCI frequency.
Configuration options: [Auto], [67.2MHz, 33.6MHz], [72.0MHz, 36.0MHz],
[64.0MHz, 32.0MHz], [76.0MHz, 38.4MHz].
SDRAM CAS Latency:
This parameter controls the latency between the read command and the
time the data available.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
AGP Aperture Size
ICH Delayed Transaction
USB Controller
USB Device Legacy Support
CPU Thermal Throttling
DRAM Write Throttling
AGP / PCI Frequency
******** DRAM Timing ********
SDRAM CAS Latency
Configure SDRAM Timing by SPD
SDRAM RAS# Precharge
SDRAM RAS# to CAS# Delay
SDRAM Precharge Delay
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Chipset Configuration
Disabled
Enabled
Disabled
Disabled
Disabled
Auto
Auto
Disabled
3 Clocks
3 Clocks
7 Clocks
<Enter> to select the
size of mapped memory
for graphics data.
64MB
