background image

4

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in 
any language, in any form or by any means, except duplication of documentation by 
the purchaser for backup purpose.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for 
identifi cation or explanation and to the owners’ benefi t, without intent to infringe.

Disclaimer:

Specifi cations and information contained in this manual are furnished for informa-
tional use only and subject to change without notice, and should not be constructed 
as a commitment by us. We assumes no responsibility for any errors or omissions 
that may appear in this manual.  
With respect to the contents of this manual, We do not provide warranty of any kind, 
either expressed or implied, including but not limited to the implied warranties or 
conditions of merchantability or fi tness for a particular purpose.
In no event shall we, its directors, offi cers, employees, or agents be liable for any 
indirect, special, incidental, or consequential damages (including damages for loss 
of profi ts, loss of business, loss of data, interruption of business and the like), even 
if we have been advised of the possibility of such damages arising from any defect 
or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: 
(1)  this device may not cause harmful interference, and 
(2)  this device must accept any interference received, including interference that  

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic 
substance controlled in Perchlorate Best Management Practices (BMP) regulations 
passed by the California Legislature. When you discard the Lithium battery in Cali-
fornia, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see 
www.dtsc.ca.gov/hazardouswaste/perchlorate”

The Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are registered trade-
marks of Fatal1ty, Inc., and are used under license. © 2011 Fatal1ty, Inc. All rights 
reserved. All other trademarks are the property of their respective owners. 
Fatal1ty website: www.fatal1ty.com

Содержание FATAL1TY P67 PERFORMANCE Series


































































Отзывы: