background image

16

Chapter 2: Installation 

This is an ATX form factor (12.0" x 9.6", 30.5 x 24.4 cm) motherboard. Before you 

install the motherboard, study the confi guration of your chassis to ensure that the 

motherboard fi ts into it.

 

Make sure to unplug the power cord before installing or removing the  

 

motherboard. Failure to do so may cause physical injuries to you and  

 

damages to motherboard components.

       

2.1  Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the 

chassis.  

 

Do not over-tighten the screws!  Doing so may damage the motherboard.

2.2  Pre-installation Precautions

Take note of the following precautions before you install motherboard components 

or change any motherboard settings.

1.   Unplug the power cord from the wall socket before touching any component.

2.   To avoid damaging the motherboard components due to static electricity, 

 

NEVER place your motherboard directly on the carpet or the like. Also 

 

remember to use a grounded wrist strap or touch a safety grounded object 

 

before you handle components. 

3.   Hold components by the edges and do not touch the ICs. 

4.   Whenever you uninstall any component, place it on a grounded antistatic pad or  

 

in the bag that comes with the component. 

 

 

      Before you install or remove any component, ensure that the power is 

 

 

      switched off or the power cord is detached from the power supply.     

 

 

       

      Failure to do so may cause severe damage to the motherboard, peripherals, 

 

 

      and/or components.

Содержание FATAL1TY P67 PERFORMANCE Series


































































Отзывы: