ASROCK 90-MXBK10-A0UAYZ, Руководство пользователя

Страница: 50 / 59

English
46
Step 3
Before installing a M.2 SSD
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Move the standoff based on the
module type and length. The
standoff is placed at the nut location
B by default. Skip Step 4 and 5 if
your M.2 SSD module is Type 2280.
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
1
1
2